Curved Corner Bumper Guards - Universal Fit - (2 Pack ) 2 Colors

Bumper corners are where the damage almost always starts. Not the flat center section that most people think about when they think about bumper protection—but the curved outer corners that stick out furthest from the vehicle profile and make first contact with everything from tight parking garage pillars to poorly judged reversing maneuvers to the car that parked just slightly too close in the supermarket car park. Corners are exposed, they're vulnerable, and they're the part of the bumper that repair shops see most consistently across every make and model they work on.

Standard bumper protection strips address the center section. This curved corner bumper guard was specifically designed for the corners—and the curved profile of the guard is the detail that makes it actually work where generic flat strips consistently fail. A flat strip applied to a curved bumper corner lifts at the edges, creates gaps where moisture and debris collect behind the guard, and eventually peels away from the contact points where adhesion is most critical. A curved guard that follows the natural radius of the bumper corner maintains full contact across the entire surface—flush fitting from edge to edge with no lifting, no gaps, and no compromise in the adhesive bond that keeps it in place.

The sleek, curved design does something that most protective accessories avoid attempting — it looks genuinely good on the vehicle rather than simply functional. The clean curves and refined profile add a subtle decorative quality to the bumper corners that makes the guards look like a deliberate styling choice rather than an obvious afterthought. At 30 x 15 cm, the coverage is generous enough to protect the full corner zone—the full arc of the bumper corner from one edge to the other—while the slim profile keeps the visual impact minimal and the aesthetic clean.

Available in black and white — the two color options that address the two most common exterior color situations. Black suits darker vehicles, blends naturally with most bumper surfaces, and disappears against the vehicle profile in a way that makes the guard virtually invisible from a normal viewing distance. White suits lighter-colored vehicles—particularly white, silver, and light grey exteriors where a black guard would create an obvious visual contrast that draws attention to the addition rather than the vehicle. Both options conceal existing corner scuffs and damage from the moment they're fitted.

The enhanced 3M double-sided adhesive bonds firmly to bumper corner surfaces through washing, weather, and temperature change without lifting. Clean thoroughly before application and avoid water contact for 24 hours after fitting. Two guards per pack cover either both front corners or both rear corners—order two packs for complete four-corner protection across the full vehicle perimeter.

• Curved Profile Designed Specifically for Bumper Corners — The curved guard profile follows the natural radius of bumper corners—maintaining full surface contact from edge to edge without the lifting, gaps, and adhesive failure that flat strips consistently develop when applied to curved corner surfaces. Protection that fits the actual shape of what it's protecting rather than approximating it.
• Generous 30 x 15 CM Coverage for the Full Corner Zone — At 30 x 15 CM, each guard covers the complete arc of the bumper corner—the full exposure zone from one edge of the corner curve to the other. Comprehensive corner coverage rather than a narrow strip that only addresses the very tip of the corner while leaving the surrounding area unprotected.
• Available in Black & White for Natural Exterior Integration — Black integrates naturally with darker bumper surfaces and virtually disappears against the vehicle profile at normal viewing distances. White suits lighter vehicles—white, silver, and light grey exteriors—where a black guard would create obvious contrast. Both options conceal existing corner scuffs from the moment of installation.
• Stylish Curved Design That Looks Deliberate Rather Than Protective — The clean, curved profile and refined finish give these guards a decorative quality that most protective accessories don't attempt. It looks like a considered styling detail on the bumper corner rather than an obvious afterthought—protection that improves the vehicle's appearance while delivering it.
• Enhanced 3M Double-Sided Adhesive for Secure Corner Bonding — Upgraded 3M double-sided adhesive creates a firm, lasting bond with curved bumper corner surfaces—holding through car washing, weather exposure, and temperature extremes without lifting at the edges or peeling from the contact points where adhesion matters most. Clean thoroughly and avoid water contact for 24 hours after application.
• Universal Fit for All Vehicles—2 Pack for Simultaneous Corner Coverage—Compatible with all cars, SUVs, MPVs, pickups, and trucks universally. Two guards per pack cover either both front or both rear corners simultaneously—order two packs for complete four-corner protection across the full vehicle perimeter. Three-step installation requires no tools and takes minutes from start to finish.